 |
|
| DIMENSIONS | SPECIAL FEATURES | OPTIONAL FEATURES | STANDARD FEATURES |
| DOWNLOAD A SPECIFICATION SHEET |
| |
| DIMENSIONS |
| Overall Length: |
45.58 ft 13.89 m
|
| Wheelbase: |
315.00 in 8.00 m
|
| Overall Width: |
102.00 in 2.59 m |
| Overall Height: |
149.00 in 3.78 m
|
| Interior Height: |
89.00 in 2.26 m
|
| Entrance Door Width: |
30.00 in .76 m
|
| Front Track: |
84.72 in 2.15 m
|
| Rear Track (Drive): |
75.38 in 1.91 m
|
| Rear Track (Trailing): |
84.72 in 2.15 m
|
| Turning Radius: |
46.00 ft 14.02 m |
| Vehicle Weight: |
32,500 lbs 14,772 kg |
| Gross Vehicle Weight: |
54,000 lbs 24,494 kg
|
| Luggage Compartment Volume: |
445.00 cu ft, 11.8 cu m (with standard full-A/C)
503.00 cu ft, 14.2 cu m (with driver-only A/C option) |
| |
|
| SPECIAL FEATURES |
- Spiral entrance stairway
- Self-levelling suspension for superior ride quality
- Electronically controlled, heated, chrome exterior mirrors with integral turn signal
- One key fits all locking exterior doors and ignition; separate keys for ignition and driver's compartment
- Any combination of fixed, push-out or sliding double-glazed glass windows and composite closing panels
- Isringhausen 6800 high-back air-ride driver's seat or USSC 9100ALX air-ride driver's seat
- HWH automatic 4-point leveling system
- Automatic traction control system
- Keyless remote entry system
|
| |
|
| OPTIONAL FEATURES |
- Single front slide out room
- Single or double rear slide out room
- Driver's only A/C option
|
| |
|
| STANDARD FEATURES |
| Safety: |
SmarTire® Tire Monitor System NEW
|
| Engine Manufacturer: |
Caterpillar® C13 430hp with CAT engine compression brake |
| Transmission: |
Allison B500 automatic transmission, six forward speeds and one reverse speed |
| Fuel System: |
222 U.S. gal (840 L) fuel tank |
| Cooling System: |
Combined radiator and charge air cooler system |
| Fan Clutch: |
Electromagnetic, 3-speed |
| Fan Diameter: |
34 inches (864 mm) |
| Propeller Shaft: |
Meritor® 1810 series
|
| Alternators: |
Dual Bosch Alternators
|
| Batteries: |
Two 8D (1350 c.c.a each) |
| Voltage: |
12 volt and 24 volt |
| Exterior Lights: |
12 volt
|
| Indicators: |
Engine oil psi, transmission, engine tachometer, speedometer/odometer, primary and secondary air psi, fuel and voltmeter |
| Front Axle: |
Meritor® 18,000 lb |
| Rear Axle: |
Meritor® axles; 23,000-lb drive; 16,500-lb tag |
| Suspension: |
Enhanced Bosch Tuned Wide Stance w/KONI FSD shocks |
| Steering System: |
Leather-wrapped tilt and telescoping steering wheel with ZF variable ratio |
| Wheels: |
Steel wheels or optional polished aluminum hub mount 22.5 x 9.0 |
| Tires: |
315 80R 22.5 L-rated |
| Brakes: |
Meritor® EX-225 disc brakes w/unitized wheel ends (front & tag axle)
& preset bearings (drive axle) |
| Parking Brake: |
MGM spring brake on drive axle |
| Frame Construction: |
Semi-monocoque stainless steel |
| Exterior Skin: |
Composite front and rear caps, composite sidewalls, one-piece aluminum roof sheet, composite service doors |
| Baggage Doors: |
Composite RTM |
| Entrance Door: |
Manually operated 30-inch-wide |
| Bumpers: |
Energy absorbing front and rear bumpers |
| |
|
| SmarTire, Caterpillar, and Meritor are registered trademarks of their respective companies. |
| |
| Specifications are subject to change without notice. Not all products are available in all markets. Contact MCI conversion shell sales for further details. |
| |
| *Interior finishing provided by your choice of custom converter. MCI can arrange a drop ship for you. |
